Code No

Title

CBIP- Publication No 179-1985

Manual on Barrages and weirs on Permeable foundations

CBIP- Publication No 12-1981

Design of weirs on Permeable foundations

IS 456 :2000 (Fourth Revision)

Plain and reinforced concrete - Code of practice (Fourth Revision)

IS 457 : 1957

Code of practice for general construction of plain and reinforced concrete for dams and other massive structures

IS 1343:2012

Code of practice for prestressed concrete (second revision)

SP:16-1980

Design Aids for Reinforced Concrete to IS 456-1978

SP:24-1983

Explanatory Handbook on Indian Standard Code of Practice for Plain and Reinfirecd Concrete IS 456-1987

SP 34 : 1987

Handbook on Concrete Reinforcement and Detailing

IS 2911 : Part 1 : Sec 1 : 2010 (Second Revision)

Design and construction of pile foundations - Code of practice: Part 1 Concrete Piles: Sec 1 Driven cast in - Situ concrete piles (Second Revision)

IS 2911 : Part 1 : Sec 2 : 2010 (Second Revision)

Design and construction of pile foundations - Code of practice: Part 1 Concrete Piles: Sec 2 Bored cast in - Situ concrete piles (Second Revision)

IS 2911 : Part 1 : Sec 3 : 2010 (Second Revision)

Design and construction of pile foundations-” Code Of Practice Part 1 Concrete Piles: Sec 3 Driven Precast Concrete Piles (Second Revision)

IS 2911 : Part 1 : Sec 4 : 2010 (First Revision)

Design and construction of pile foundations - Code of practice: Part 1 concrete piles: Sec 4 Precast concrete piles in prebored holes (First Revision)

IS 2911 : Part 2 : 1980 (First Revision)

Code of practice for design and construction of pile foundations: Part 2 Timber piles (First Revision)

IS 2911 : Part 3 : 1980 (First Revision)

Code of practice for design and construction of pile foundations: Part 3 Under-reamed piles

IS 2911 : Part 4 : 2013 (Second Revision)

Design and construction of pile foundations - Code of practice: Part 4 Load test on piles (Second Revision)

IS 800 : 2007 (Third Revision)

General construction in steel - Code of practice (Third Revision)

IS 801:1975

 Code of practice for use of cold formed light gauge steel structural members in general building construction (first revision)

IS 802(Part 1/Sec Code of practice for use of structural steel in overhead 1):1995

 transmission line towers, Part 1 Materials, Loads and permissible stresses Section 1 Materials and Loads (third revision)

IS 802(Part 1/Sec Code of practice for use of structural steel in overhead 2):1992

 transmission line towers Part 1 : Material, loads and permissible stress Section 2 Permissible stress (third revision)

IS 802(Part 2):1978

 Code of practice for use of structural steel in overhead transmission line towers: Part 2 Fabrication, galvanizing, inspection and packing 6 IS 802(Part 3):1978 Code of practice for use of structural steel in overhead transmission line towers: Part 3 Testing

IS 803:1976

 Code of practice for design, fabrication and erection of vertical mild steel cylindrical welded oil storage tanks (first revision)

IS 804:1967

 Specification for rectangular pressed steel tanks (first revision)

IS 805:1968

 Code of practice for use of steel in gravity water

IS 806:1968

 Code of practice for use of steel tubes in general building construction (first revision)

IS 808:1989

 Dimensions for hot rolled steel beam, column, channel and angle sections (third Revision)

IS 811:1987

 Specification for cold formed light gauge structural steel sections (second revision)

IS 4000:1992

 Code of practice for high strength bolts in steel structures (first revision)

IS 4014(Part 1):1967

 Code of practice for steel tubular scaffolding Part 1 Definitions and materials

IS 6533(Part 1):1989

 Code of practice for design and construction of steel chimneys Part 1 Mechanical aspects (first revision)

IS 6533(Part 2):1989

 Code of practice for design and construction of steel chimneys Part 2 Structural aspects (first revision)

IS 7205:1974

 Safety code for erection of structural steel work

IS 7215:1974

 Tolerances for fabrication of steel structures

IS 875(Part 1):1987

Code of practice for design loads (other than earthquake) for buildings and structures Part 1 Dead loads - Unit weights of building material and stored materials (second revision) (Incorporating IS:1911-1967)

IS 875(Part 2):1987

Code of practice for design loads (other than earthquake) for buildings and structures: Part 2 Imposed loads (second revision)

IS 875(Part 3):1987

Code of practice for design loads (other than earthquake) for buildings and structures: Part 3 Wind loads (second revision)

IS 875(Part 4):1987

Code of practice for design loads (other than earthquake) for buildings and structures Part 4 Snow loads (second revision)

IS 875(Part 5):1987

Code of practice for design loads (other than earthquake) for buildings and structures Part 5 Special loads and load combinations (second revision)

IS 1893:1984

Criteria for earthquake resistant design of structures (fourth revision)

IS 1893(Part 1):2002

Criteria for earthquake resistant design of structures: Part 1 General Provisions and buildings (fifth revision)

IS 1893(Part 4):2005

Criteria for earthquake resistant design of structures: Part 4 Industrial structures including stack-like structure

IS 4326:2013

Code of practice for earthquake resistant design and construction of buildings (third revision)

IS 4967:1968

Recommendations for seismic instrumentation for river valley projects

IS 4991:1968

Criteria for blast resistant design of structures for explosions above ground

IS 6922:1973

Criteria for safety and design of structures subject to underground blasts

IS 13827:1993

Improving earthquake resistance of earthen buildings –

IS 13828:1993

Improving earthquake resistance of low strength masonry buildings - Guidelines

IS 13920:2016

Ductile detailing of reinforced concrete structures subjected to seismic forces- Code of practice

IS 13935:2009

Guidelines for evaluation, repair and seismic strengthening of masonry buildings (first revision)

IS 15988:2013

Seismic Evaluation and Strengthening of Existing Reinforced Concrete Buildings - Guidelines.

IRC:5-2015

Standard Specifications and Code of Practice for Road Bridges, Section I – General Features of Design (Eighth Revision)

IRC:6-2017

Standard Specifications and Code of Practice for Road Bridges, Section-II Loads and Load Combinations (Seventh Revision)

IRC:22-2015

Standard Specifications and Code of Practice for Road Bridges, Section VI – Composite Construction (Limit States Design) (Third Revision)

IRC:24-2010

Standard Specifications and Code of Practice for Road Bridges, Steel Road Bridges (Limit State Method) (Third Revision)

IRC:75-2015

Guidelines for the Design of High Embankments (First Revision)

IRC:78-2014

Standard Specifications and Code of Practice for Road Bridges, Section VII- Foundations and Substructure (Revised Edition)

IRC:SP:82- 2008

Guidelines for Design of Causeways and Submersible bridges

IRC:83-2015 (Part-I)

Standard Specifications and Code of Practice for Road Bridges, Section IX Bearings, Part I : Roller & Rocker Bearings (Second Revision)

IRC:83-2018 (Part II)

Standard Specifications and Code of Practice for Road Bridges, Section : IX – Bearings (Elastomeric Bearings), Part II (Second Revision)

IRC:83-2018 (Part III)

Standard Specifications and Code of Practice for Road Bridges, Section IX – Bearings, Part III: POT, PIN, Metallic Guide and Plane Sliding Bearings (First Revision)

IRC:83-2014 (Part IV)

Standard Specifications and Code of Practice for Road Bridges, (Section IX) – Bearings (Spherical and Cylindrical)

IRC:112-2019

Code of Practice for Concrete Road Bridges

IRC:SP:20- 2002

Rural Roads Manual

IRC:SP:13-2004

Guidelines for design of small bridges and culverts

MOST VOL-III

Standard Plans for Highway Bridges (T Deck Slab)

IS 16014-2012

Mechanically woven, double -twisted, hexagonal Wire Mesh Gabions, Revet Mattresses and Rock fall Netting( Galvanized steel wire or Galvanized steel wore with PVC coating) - Specification

IS 3370:Part 1: 2009

(First Revision)

Code of practice Concrete structures for the storage of liquids Part 1 General requirements

IS 3370 : Part 2 :

2009

(First Revision)

Code of Practice Concrete structures for the storage of liquids Part 2

Reinforced concrete structures

IS 3370 : Part 3 :

1967

Code of Practice Concrete structures for the storage of liquids Part 3

Prestressed concrete structures

IS 3370 : Part 4 :

1967

Code of practice for concrete structures for the storage of liquids:

Part 4 Design tables

IS 1498 : 1970

(First Revision)

Classification and identification of soils for general engineering purposes (First Revision)

IS 4651 : Part 1 :

1974

(First Revision)

Code of practice for planning and design of ports and harbours: Part 1 site investigation (First Revision)

IS 4651 : Part 2 :

1989

(First Revision)

Ports and harbours - Planning and design - Code of practice: Part 2 earth

pressures (First Revision)

IS 4651 : Part 3 :

1974

(First Revision)

Code of Practice for Planning and Design of Ports and Harbours -Part III: Loading

IS 4651 : Part 4 :

2014

(Third Revision)

Planning and design of ports and harbours - Code of practice: Part 4 general design considerations (Third Revision)

IS 4651 : Part 5 :

1980

Code of practice for planning and design of ports and harbours: Part 5

layout and functional requirements